Home >> Product >> Dust filter >> Dust filter with three earlaps

Dust filter with three earlaps

Dust filter with three earlaps

Dust filter with three earlaps-Overview
CWWSE outer ear quick release filter in the generic type dust filter the core of the peripheral welding three hangers, etc., this open hangers for the lateral direction, easy to screw the screw holes for installation and removal, all three hanging ear openings are in the same center of a circle track, suitable for the installation of the rotary, three ear QR -type phase for the quick release filter cost less a folding cover, but an increase of the installation need to adjust the screw tightness of trouble, in any case than the ordinary type filter on the cost of installation, disassembly time saving convenience.
CWWSE outer ear quick release models with more flexible, and almost any diameter size of the filter can be made outside the three ear quick release, filter height of unfettered, and remove the lifting lever device, effort, save money, be regarded as a long Viagra utility model filter.

CWWSEDust filter parameters with of three earlaps Common Specifications
 

除尘滤芯

Model
outer diameter
height
diameter
total height of
 
cover the inner diameter of
filtration area of ​​
 
CWWSE-1960
190
600
90
610
0
6.5
CWWSE-2466
240
660
140
670
0
7.0
CWWSE-3590
350
900
240
910
0
9.0


Dust, filter with three earlaps-design performance
»Open Folding design
»100% high-tenacity polyester
»Top of the opening at the bottom of the back cover
»Core galvanization steel net component
»Seal with good elasticity, high strength, anti-aging, closed-cell nitrile rubber
»End plate with high-quality power board material, rust, corrosion, external prominent jaw chuck to install
The use of high-quality imported water »adhesives, no degumming, the cracking phenomenon
Note: filter installation direction as far as possible perpendicular to the ground

You can submit online purchase intent, and we will contact you within half an hour.
*
*
*
*